EarthQuaker Devices - Silos Hypnotic Edition - Multi-Generational Time Reflection Delay Pedal - Limited Edt.

Unlike anything before it, the Silos™ merges together a digital, analog, and tape delay into one compact and powerful pedal. In addition to the tri-voice delay, it features tap tempo, user-assignable expression control, and the ability to save and recall six presets, making it endlessly customizable and easy to operate. It’s like having three classic pedals all rolled into one! Now you can save room on your pedalboard while never having to decide which single delay to use again. 

3 Modes Of Impeccable Sounding Delay

Each of the three modes offers up to one second of delay time. From noon and back is 500 milliseconds to zero, which has its own character. From 500 milliseconds to one second of delay time, it’s an entirely different beast. Dial them in for shorter delay times where they really excel and add loads of atmosphere and vibes. Push them further for rhythmic delays that are perfect for strumming and adding extra ambiance for your riffs. Each of the three delay modes is uniquely different and offers its own unique character when selected. 

Mode D: Digital Delay

This mode offers bright repeats that remain strong as they decay. Shorter settings give you a bold stuttering staccato sound, while longer settings give you ambiance with longer repeats.

Mode A: Analog Delay

This mode is very mid-focused with faster diminishing repeats and dark and murky build ups. Boasting a big presence without low end throb or overpowering high end, this works equally well with a clean signal or distortion.

Mode T: Tape Delay

Reminiscent of a well-loved tape delay with just a hint of oil can delay vibes mixed in for good measure. Roll it on for everything from dark undertones to atmospheric terrains.

Global Features

Pairs Perfectly With Distortion

Silos was meticulously designed to respond well to gain and overdrive saturation.

Presets

Silos has six available preset slots for you to save and recall your favorite settings. The settings for each of the three controls, the mode switch and the expression jack assignment can be saved and recalled in any of the slots. 

Easily Switch Between Delay Modes

Silos has two operating modes which are extremely easy to switch between on the fly! In Live mode, the pedal will operate exactly where the controls are set and any changes will have no effect on the presets unless saved. In Preset mode, stored presets (including expression pedal mapping) are selected using the Preset switch, and the physical settings of the controls will be ignored.

User-Assignable Expression Control

Use any TRS expression pedal to take control over the Time, Repeats or Mix.

Controls

• Mode Toggle: Toggles between Digital Delay, Analog Delay, and Tape Delay 
• Time: This sets the delay time from 0–1 second.
• Repeats: This controls the regeneration of the delay signal. This mode does not self-oscillate in Digital Mode but begins to self-oscillate at 3 o’clock in Analog and Tape Modes. 
• Mix: Adjusts the level of the delay signal.
• Preset: Six available preset slots for you to save and recall your favorite settings. The settings for each of the three controls, the Mode switch and the expression jack assignment can be saved and recalled in any of the slots.

TECH SPECS

Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs

Current Draw: 75 mA

Input Impedance: 500 kΩ

Output Impedance: 100 Ω

TRS expression pedal wiring

Tip: Wiper

Ring: +3.3V

Sleeve: Ground

Flexi-Switch® Technology

This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

• For standard latching operation: tap the footswitch once to activate the effect and then tap again to bypass.

• For momentary operation: hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

Silos is buffered bypass with tails. Power is required to pass signal.

Power

This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

DOWNLOAD MANUAL HERE

WATCH THE DEMO HERE